[EnergyPlus_Support] Outward Facing angles of subsurfaces problem?

["neslihanturkmenoglu" <neslihanturkmenoglu@xxxxxxxxx>]

hi 
when I run my simulation with E+2.1 there is no problem but after 
transition to E+2.2 I began to get error as below.
I checked the coordinates they seem true. What is the problem? 
thank you very much


** Warning ** Requested Time Steps in Hour (1) is less than the 
suggested minimum of 4.
   ** Severe  ** GetSurfaces: Some Outward Facing angles of subsurfaces 
differ significantly from base surface.
   **   ~~~   ** ...use Diagnostics,DisplayExtraWarnings; to show more 
details on individual surfaces.
   ** Warning ** CAUTION -- Interzone surfaces are occuring in the same 
zone(s).
   **   ~~~   ** ...use Diagnostics,DisplayExtraWarnings; to show more 
details on individual occurrences.


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/