[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Outward Facing angles of subsurfaces problem?



thank you Linda
as I understood;you tell that problem occuring, as I drew a  zone in the middle without defining two surrounding zones, is ignorable. 
I put extra warnings in diagnostics, Now I have new born warnings:) 
Zone Air Heat Balance is out of balance for zone named OFIS-ZONE1
   **   ~~~   ** Zone Air Heat Balance Deviation Rate is more than 119.1 (Watts)
   **   ~~~   **  Occurance info: Occurrence info=ISTANBUL ANN CLG .4% CONDNS DB=>MWB, 08/21 10:00 - 10:02
I again need a translation to what I did again? :)
Thank you very very much

--- On Tue, 5/27/08, Linda Lawrie <linda@xxxxxxxxxx> wrote:

From: Linda Lawrie <linda@xxxxxxxxxx>
Subject: Re: [EnergyPlus_Support] Outward Facing angles of subsurfaces problem?
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Date: Tuesday, May 27, 2008, 5:37 PM






This is a warning to tell you that you have interzone (connecting) 
surfaces in the same zone. Normally you would have different zones 
on the side of each surface but you might use these (such as linking 
a ceiling to a floor) for a "middle zone" in a large building. It's 
a warning to make sure you know what you are doing as you use these.

If you put in the Diagnostics, DisplayExtraWarning s; statement you 
will see exactly what surfaces it is complaining about.

Linda

At 07:27 AM 5/27/2008, neslihanturkmenoglu @yahoo.com wrote:
>thank you Farhang
>I fixed severe error by our help but
>Warning ** CAUTION -- Interzone surfaces are occuring in the same 
>zone(s). still goes on. Do you have another suggestion?

[Non-text portions of this message have been removed]

 














      

[Non-text portions of this message have been removed]


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/