Re: [EnergyPlus_Support] Outward Facing angles of subsurfaces problem?

[Linda Lawrie <linda@xxxxxxxxxx>]

This is a warning to tell you that you have interzone (connecting) 
surfaces in the same zone.  Normally you would have different zones 
on the side of each surface but you might use these (such as linking 
a ceiling to a floor) for a "middle zone" in a large building.  It's 
a warning to make sure you know what you are doing as you use these.

If you put in the Diagnostics, DisplayExtraWarnings; statement you 
will see exactly what surfaces it is complaining about.

Linda

At 07:27 AM 5/27/2008, neslihanturkmenoglu@xxxxxxxxx wrote:
>thank you Farhang
>I fixed severe error by our help but
>Warning ** CAUTION -- Interzone surfaces are occuring in the same 
>zone(s). still goes on. Do you have another suggestion?


[Non-text portions of this message have been removed]


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/