[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [EnergyPlus_Support] EnergyPlus Crass Error "forrtl: severe (151)"
Hi again,
I?ve noticed that the picture with the error message was not sent, so here
it goes the previous e-mail with complete message J
Hi all,
I?m doing simulation studies with Daylighting : Detailed model.
I?ve many zones with daylighting controls, to whom I?ve defined Illuminance
Maps.
I?ve also exterior window shading control in one of those zones.
When I try to run the simulation I? got a EP crash. By defining ?pausing
during simulation? I took the following error:
Computing window shade absorption factors
forrtl: severe (151): allocatable array is already allocated
Image PC Routine
line Source
Energyplus.exe 00BBAB9A unknown
unknown unknown
Energyplus.exe 00BB843D unknown
unknown unknown
Energyplus.exe 00B4B66A unknown
unknown unknown
Energyplus.exe 00B48823 unknown
unknown unknown
Energyplus.exe 005C1513 _daylightingmanag
2515 daylightingmanager.f90
Energyplus.exe 005BF2CE _daylightingmanag
2146 daylightingmanager.f90
Energyplus.exe 005B446D _daylightingmanag
431 daylightingmanager.f90
Energyplus.exe 0065A14C _solarshading_mp
5689 solarshading.f90
Energyplus.exe 00B17EEB _heatbalancemanag
3157 heatbalancemanager.f90
Energyplus.exe 00B138F0 _heatbalancemanag
157 heatbalancemanager.f90
Energyplus.exe 00B18B29 _sizingmanager_mp
211 sizingmanager.f90
Energyplus.exe 00B1D934 _simulationmanag
125 simulationmanager.f90
Energyplus.exe 00B25FE4 _MAIN_
284 energyplus.f90
Energyplus.exe 00BBECD1 unknown
unknown unknown
Energyplus.exe 00BAA68C unknown
unknown unknown
Energyplus.exe 7C816FF7 unknown
unknown unknown
Can anybody help me on this? I?ve no idea what?s going on and how can I
solve the situation.
Thanks in advance
Filipe Madureira
Tel: +351 919 293 876 | E-mail: filipe.madureira@xxxxxxxxxxxxx
==============================================================
Fluidinova, Engenharia de Fluidos, SA
TECMAIA - Parque de Ciência e Tecnologia da Maia
Rua Engº Frederico Ulrich, nº 2650
4470-605 Moreira da Maia - Portugal
Tel: +351 229 408 265 | Fax: +351 229 408 266
E-mail: geral@xxxxxxxxxxxxx | Web: www.fluidinova.pt/
==============================================================
From: EnergyPlus_Support@xxxxxxxxxxxxxxx
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Filipe madureira
Sent: 29 May 2008 15:55
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] EnergyPlus Crass Error "forrtl: severe (151)"
Hi all,
I?m doing simulation studies with Daylighting : Detailed model.
I?ve many zones with daylighting controls, to whom I?ve defined Illuminance
Maps.
I?ve also exterior window shading control in one of those zones.
When I try to run the simulation I? got a EP crash. By defining ?pausing
during simulation? I took the following error:
forrtl: severe (151): allocatable array is already allocated (see picture
below)
Can anybody help me on this? I?ve no idea what?s going on and how can I
solve the situation.
Thanks in advance
Filipe Madureira
Tel: +351 919 293 876 | E-mail: filipe.madureira@xxxxxxxxxxxxx
<mailto:filipe.madureira%40fluidinova.pt>
==============================================================
Fluidinova, Engenharia de Fluidos, SA
TECMAIA - Parque de Ciência e Tecnologia da Maia
Rua Engº Frederico Ulrich, nº 2650
4470-605 Moreira da Maia - Portugal
Tel: +351 229 408 265 | Fax: +351 229 408 266
E-mail: geral@xxxxxxxxxxxxx <mailto:geral%40fluidinova.pt> | Web:
www.fluidinova.pt/
==============================================================
From: EnergyPlus_Support@xxxxxxxxxxxxxxx
<mailto:EnergyPlus_Support%40yahoogroups.com>
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx
<mailto:EnergyPlus_Support%40yahoogroups.com> ] On Behalf Of Griffith, Brent
Sent: 24 May 2007 23:19
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
<mailto:EnergyPlus_Support%40yahoogroups.com>
Subject: RE: [EnergyPlus_Support] What is wrong with my daylighting
simulation result?
This is usually a mix up with regard to world coordinates vs relative
coordinates. The daylighting points are in a zone coordinate system,
relative to the origin of the zone.
________________________________
From: EnergyPlus_Support@xxxxxxxxxxxxxxx
<mailto:EnergyPlus_Support%40yahoogroups.com>
<mailto:EnergyPlus_Support%40yahoogroups.com>
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx
<mailto:EnergyPlus_Support%40yahoogroups.com>
<mailto:EnergyPlus_Support%40yahoogroups.com> ] On Behalf Of mingming_zuo
Sent: Thursday, May 24, 2007 9:39 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
<mailto:EnergyPlus_Support%40yahoogroups.com>
<mailto:EnergyPlus_Support%40yahoogroups.com>
Subject: [EnergyPlus_Support] What is wrong with my daylighting
simulation result?
Hi, recently i carried out a daylighting simulation . The result seems
completely unexpected with many warnings such as"** Warning **
SetUpDaylightCoords: Reference point X Value outside Zone Min/Max X"
and output daylighting map has every grid points with the same lux
value.Can anyone explain these? Thanks!
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/