[EnergyPlus_Support] scheduling by outdoor ambient temperature

[yun-shang chiou <yunshangchiou@xxxxxxxxx>]

I am trying to specify a heating/cooling on-off schedule that is based upon outdoor ambient temperature (e.g. cooling system is on only when outside ambient temperature drops below 10C) AND to have indoor ambient temperature reaches certain set points when the heating /cooling system is on. 

Think for a while about things such as placing thermostat outside (can't work for several obvious reasons). Cannot figure out how still.

Is there anyway to do so in Eplus?

Thanks!

Chiou



      

[Non-text portions of this message have been removed]


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/