[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Fictious Wall, partition or slab on DBuilder or EnergyPlus - Air Blade



Hi Linda
 
Thank for your answer concerning the polycarbonate.
 
If I have:
 
1) If I have one room, but I need to divide in two rooms, and the division is air. 
 
2) on DBuilder, if I have for instance, a block that is divided in two blocks, it will be created an interior Floor.
 
    I want to define the interior floor has "AIR" and create a suspended ceiling which has plaster + Rockwool  
 
So, How can I define a fictious wall , partition, slab or other, that can on EPlus and DBuilder simulate an Air blade?
 
Regards
 
A L
 
 
----- Original Message ----
From: Linda Lawrie <linda@xxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Wednesday, June 25, 2008 3:12:27 PM
Subject: Re: [EnergyPlus_Support] Warning: Heat Balance is out of balance

Ignore the Air Heat Balance out of balance warnings for now.

They are mostly for developers (at this point) and were put into 2.2 release by mistake. 

Linda

EnergyPlus WebSite: http://www.energypl us.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team


__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___