[EnergyPlus_Support] svg problem in 5zoneFPIU

[Justin Wong <justinw@xxxxxxxxxxxxxxx>]

Hi all,

I have run the example 5zonefpiu.idf in v2.1. I couldn't find any error 
in the err file, however, when I look at the svg file, I was prompt with 
the error below.

ERROR - COULD NOT COMPLETE DRAWING! Examine ERR file for possible 
explanation. Last error message is:   "Diagram pieces not linked 
(upstream): SPACE1-1 HW COIL"

Any suggestion is most welcome.

Justin

------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/