The error was: Create Drawing files from IDF has detected a problem.__._,_.___
What would happen if walls and windows have the same thickness?. In a
greenhouse walls are made of plastic and in order to simulate in
EnergyPlus I have to enter walls and windows with the same
properties. When I try to create a DFX file (I haven't try yet to
simulate, just to be sure the geometry is correct) with just walls I
don't get any problem. When I enter windows, then I get the error of
creating a drawing file.
I hope you can help me
Thanks
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@...>
wrote:
>
> The drawing does not include thickness, only
> geometry. What was the error message?
>
> Linda
>
> At 06:02 AM 8/29/2008, Andrés Montero wrote:
> >Does anyone know the minimum thickness for Material:Regular and
> >Material:WindowGlass?
> >
> >I'm trying to simulate a greenhouse and I'm using walls and windows
> >mede of a plastic material (and of course, the thickness is very
small)
> >and when I try to generate the drawing I got an error message.
> >
> >Thanks
>
------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/