[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Thickness



--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Andrés Montero 
<amontero75@...> wrote:
>
> I have AutoCad as a dfx viewer, and I don't get a dxf file since it 
> can't be created when I try to creat ir.
> I will try to upload de idf file to the gruop in order to get help. 
> You can try erasing the HeatTransferSub and you'll see the dxf will 
> be created without any problem, I got the error when I add a window.
> 
> thanks
> 
> 
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@> 
> wrote:
> >
> > What software are you getting that error message from?
> > 
> > It might be good to send your DXF file along with 
> > this description to energyplus-support@
> > 
> > This forum is only user to user now.
> > 
> > Linda
> > 
> > At 07:35 AM 9/2/2008, Andrés Montero wrote:
> > >The error was: Create Drawing files from IDF has detected a 
> problem.
> > >
> > >What would happen if walls and windows have the same thickness?. 
> In a
> > >greenhouse walls are made of plastic and in order to simulate in
> > >EnergyPlus I have to enter walls and windows with the same
> > >properties.  When I try to create a DFX file (I haven't try yet 
to
> > >simulate, just to be sure the geometry is correct) with just 
walls 
> I
> > >don't get any problem. When I enter windows, then I get the 
error 
> of
> > >creating a drawing file.
> > >
> > >I hope you can help me
> > >
> > >Thanks
> > >
> > >--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@>
> > >wrote:
> > > >
> > > > The drawing does not include thickness, only
> > > > geometry.  What was the error message?
> > > >
> > > > Linda
> > > >
> > > > At 06:02 AM 8/29/2008, Andrés Montero wrote:
> > > > >Does anyone know the minimum thickness for Material:Regular 
and
> > > > >Material:WindowGlass?
> > > > >
> > > > >I'm trying to simulate a greenhouse and I'm using walls and 
> windows
> > > > >mede of a plastic material (and of course, the thickness is 
> very
> > >small)
> > > > >and when I try to generate the drawing I got an error 
message.
> > > > >
> > > > >Thanks
> > > >
> > >
> > >
> > >
> > >------------------------------------
> > >
> > >The primary EnergyPlus web site is found at:
> > >http://www.energyplus.gov
> > >
> > >The group web site is:
> > >http://groups.yahoo.com/group/EnergyPlus_Support/
> > >
> > >Attachments are not allowed -- please post any 
> > >files to the appropriate folder in the Files area of the Support 
> Web Site.
> > >
> > >EnergyPlus Documentation is searchable.  Open 
> > >EPlusMainMenu.pdf under the Documentation link and press 
> the "search" button.
> > >Yahoo! Groups Links
> > >
> > >
> > >
> >
>



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/