[EnergyPlus_Support] Re: Fancoil units

["anarui.oliveira" <anarui.oliveira@xxxxxxxxx>]

If I understood correctly want you intend to do, I think you can 
substitute the Inlet Node in the "Controlled Zone Equip configuration" 
by a Node List name, and then create a Node List with 2 nodes: one for 
the Central AHU to deliver the air in the zone, and other for the 
fancoil.

Good luck.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "aymericnovel" 
<aymericnovel@...> wrote:
>
> Hi,
> 
> I am a bit new in using E+ so my question my sounds simple:
> 
> When modelling fancoil unit system, the inlet node is the zone 
exhaust 
> node and the outlet node is the zone inlet node. 
> Fine, but I want my fresh air coming from AHU to arrive in the zone 
too 
> and in my case the fancoil is not a terminal unit but is within the 
> zone. Is it possible to connect both to the zone inlet node?
>



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/