[EnergyPlus_Support] GSHP Modeling Question about spreadsheet parameters

["Elreq" <tolteca33@xxxxxxxxx>]

Dear Forum,

I am modeling a GSHP system, for which I used the spreadsheets for
generating the coefficient parameters (both parameter estimation and
equation fit)that need to be introduced in the E+ GSHP objects. But
during the process I ran into a confusion about the terms of the
parameters on the spreadsheet; my question is:
Is the Load Side Entering Water Temperature referring to the water
that is entering the heat pump or that is entering the zone to be heated?

I have assumed that it is the first, that is, the water that is coming
into the heat pump after circulating the zone to be heated, but I ask
this just to make sure.

Thanks in advance
Santiago


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/