[EnergyPlus_Support] Fancoil units control

["aymericnovel" <aymericnovel@xxxxxxxxx>]

Thank you for your help, that sounds logical indeed.

Maybe you might know about this one: The fancoil capacity is not 
regulated by waterflow management but rather by airflow 
management...SO far I only saw fancoils unit with constant speed 
fans, don't know if it would work with variable speed fans??

And this one: sounds stupid question but I didn't see anything 
corresponding to an air-to-water heat pump. I saw air to air, water 
to water, water to air, which are all logical. Air to water is not 
efficient but that's what I am asked for starting so...

Thanks,
Aymeric

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "anarui.oliveira" 
<anarui.oliveira@...> wrote:
>
> If I understood correctly want you intend to do, I think you can 
> substitute the Inlet Node in the "Controlled Zone Equip 
configuration" 
> by a Node List name, and then create a Node List with 2 nodes: one 
for 
> the Central AHU to deliver the air in the zone, and other for the 
> fancoil.
> 
> Good luck.
> 
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "aymericnovel" 
> <aymericnovel@> wrote:
> >
> > Hi,
> > 
> > I am a bit new in using E+ so my question my sounds simple:
> > 
> > When modelling fancoil unit system, the inlet node is the zone 
> exhaust 
> > node and the outlet node is the zone inlet node. 
> > Fine, but I want my fresh air coming from AHU to arrive in the 
zone 
> too 
> > and in my case the fancoil is not a terminal unit but is within 
the 
> > zone. Is it possible to connect both to the zone inlet node?
> >
>



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/