[EnergyPlus_Support] Fancoil units control

["aymericnovel" <aymericnovel@xxxxxxxxx>]

Hi,

I am modelling a Fancoil unit that should heats and cools a zone only 
with the zone air. The fresh air is brought by a AHU air loop. So far 
it is working well except I do not succeed to stop the fresh airflow of 
the fancoil unit OA mixing box. As result I have 2 times the required 
fresh air, half commes from the AHU, half comes from the fancoil unit...
When I try to set the maximum outside airflow rate of the fancoil unit 
at 0 it automatically comes back to autosize option and therefore 
connects with the zone level defined fresh air needs...

Any hint?

Thank you


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/