[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Ventilated facade



Hi,

 

I am having some problems in simulation ventilated facades. I am exporting a idf file from desingbuilder, them in energyplus I change the other condition model and exterior natural vented cavity.

The results are very strange, because i don't see any changes in the interior temperature when compared with the building without the ventilated facade.

To simulate that type of façade I only have to change the object, other condition model and exterior natural vented cavity, or I have to change other object too?

And another answer is I define the location of the building in IDF Editor, and then I input the weather file in EP-lunch, is there any problem in doing that?

 

 Thanks,

 

Catarina Carvalhal

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___