[EnergyPlus_Support] Re: hydronic radiant system surface

["Linda Lawrie" <linda@xxxxxxxxxx>]

I suggest you search the documentation and read about:
Construction With Internal Source

Linda
EnergyPlus Development Team

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "kristin1goovaerts" 
<kristin1goovaerts@...> wrote:
>
> Hi,
> 
> I'm having the exact same errors : "Construction referenced in
> Hydronic Radiant System surface does not have a source/sink".
> However, there is nothing wrong with these surfaces or constructions
> since the idf ran perfectly before I tried to add a low temp radiant
> system.
> What could be the problem?
> 
> Thanks.
>



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/