[EnergyPlus_Support] Voids on exterior walls

["vincent.priori" <vincent.priori@xxxxxxxxxx>]

Hello,

Does anyone know how can I simulate a void in an exterior wall in
order to have zone air flow directly influenced by the wind speed in
my building using natural ventilation.

The method described to insert a void between 2 zones don't seems
appropriate to me.

Do I have to insert an AIRFLOWNETWORK:MULTIZONE:SURFACE for each of
them ? (there's a lot...)
or can I transform the voids into windows and insert a
AirflowNetwork:Multizone:Zone ? and in this case, do I have to add an
AirflowNetwork:Multizone:Site Wind Conditions ?


Thanks a lot

Vincent Priori


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/