[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] sketchup plugin and adjacency

Copying an entire floor or zone does not yet work -- it maintains the names of the zones and surfaces. 

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Ellis, Peter
Sent: Thursday, November 13, 2008 2:01 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: RE: [EnergyPlus_Support] sketchup plugin and adjacency

Hi Alan,

Yes, the plugin still requires you to manually set the boundary conditions for interior walls.

I'm not sure what you mean by "if you copy a level".  In general, copy is probably not going to do what you want it to do, since it is not fully supported yet.  So if you copy a surface with the outside boundary condition set to point to surface B, then the copy will also point to surface B.

P

From: EnergyPlus_Support@yahoogroups.com [mailto:EnergyPlus_Support@yahoogroups.com] On Behalf Of Alan Jackson
Sent: Thursday, November 13, 2008 9:02 AM
To: EnergyPlus_Support@yahoogroups.com
Subject: [EnergyPlus_Support] sketchup plugin and adjacency

does the plugin still require you too manually handle adjacent
interior walls?

If so, once completed if you copy a level does it retain the adjacency?

Thanks

-
alan

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___