Re: [EnergyPlus_Support] is it possible to model 2 air loops in the same zone?

I'm not the steam loop or plant expert; you can certainly have two boilers on the same hot water loop,
so it should work for steam.

Fred

D T wrote:

Thanks for the clarification. I currently have one air loop and a steam loop with a boiler connected to it heating the largest zone in my facility. Since there are two boilers used in this zone, I was wanting to add another boiler by adding another steam loop and air loop that service the same zone. However, it seems like this won't work. Is there a way I could add another boiler to my existing steam loop so that I have two boilers on the same steam loop?

Thank you,

Dimos

--- On Wed, 11/19/08, Fred Buhl <wfbuhl@xxxxxxx> wrote:

From: Fred Buhl <wfbuhl@xxxxxxx>
Subject: Re: [EnergyPlus_Support] is it possible to model 2 air loops in the same zone?
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Date: Wednesday, November 19, 2008, 7:05 PM

It is not possible. One airloop, plus as much zone equipment as you want.

Fred Buhl

D T wrote:

Does anyone know if it possible to have 2 air loops servicing the same zone? I currently have one air loop defined for the largest zone in my facility and am trying to add another one but am trying to figure out how to connect the nodes on the demand side since that is where my problem lies.

Thanks,

Dimos

__._,_.___

The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/ Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site. EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___