[EnergyPlus_Support] Re:Peak heating and Peak cooling loads

["irishhokie09" <KevinMatthewSmith@xxxxxxxxx>]

I've been through some of the help pdf file and found out that I need
to create a zone sizing object before zone sizing can occur (seems
logical enough..) but I'm getting errors about setting a setpoint
schedule.  I tried to just create a regular schedule and point my zone
sizing object to that but had no luck. Any insight into what kind of
schedule to create to fulfill this set point requirement?

Thanks,
irishhokie09

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "ooi" <ooi_kb3@...> wrote:
>
> The peak heating and cooling loads are in the ..Zsz.csv file. 
> 
>  
> 
> After you have run a simulation, Ctrl+F5 will give you this file.
>



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/