[EnergyPlus_Support] Secondary Air Inlet on EvaporativeCooler:Indirect:ResearchSpecial Object

["stefan_thor_smith" <stsmith@xxxxxxxxx>]

Hi E+,

I'm trying to model a central A/C system that cools air taken from the building with an 
Adiabatic Spray and then cools incoming fresh air intake via a heat exchanger. I've identified 
that I need to use the EvaporativeCooler:Indirect:ResearchSpecial object and have gone about 
modelling the system.

My issue is that I'm not sure how to connect the secondary air intake in the model to the 
system. I want the secondary air inlet node of the EvapCooler to be at the beginning of the 
supply side, to take the air leaving all the building zones via a ZoneMixer object.

Any help is greatly appreciated.

Kind Regards,

Stefan 


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/