[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Using OpenStudio open .IDF file whose 'Vertex Entry Direction' is 'clockwise'



Dear all,

A question about face direction in OpenStudio.

If the 'Vertex Entry Direction' field is defined as 'clockwise' in a 
IDF file, when I open it using OpenStudio. Does the light colour 
outside mean the right face direction? Does the Plug-in read the 
field name 'Vertex Entry Direction' in E+ V3.0?

Thanks a lot!

Hu

PhD Candidate,
School of the Built Environment, 
Northumbria University,
Room 209, Wynne Jones Building,
Newcastle upon Tyne,
NE1 8ST
UK



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/