[EnergyPlus_Support] Re: CV AHU and Secondary FCU in Zone

["Alan Jackson" <alanjackson7@xxxxxxxxx>]

Richard

Thanks for the reply. I will model it like you described and hopefully
will have some success.

-
aj

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Richard Raustad
<RRaustad@...> wrote:
>
> You can have both. Start with a 1 zone model first. Autosizing the 
> equipment will size each to meet the total zone load, so after the
first 
> run, manually size the systems as appropriate for your application.
> 
> Alan Jackson wrote:
> >
> > Sorry to bring this up again but did not get any response the initial
> > go around. I would like to model a CV air system supplying ventilation
> > and cooling to a zone that also has perimeter recirculation console
> > FCUs. Do I need to have a seperate perimeter zone just for the FCUs or
> > can I have both CV and FCU in the same zone using direct air or
> > something like that.
> >
> > I just don't want to go back and have to add perimeter zones after
> > finding out it doesn't work, otherwise i would just attempt it myself.
> >
> > thanks in advance
> >
> > -
> > aj
> >
> > 
> 
> -- 
> Richard A. Raustad
> Senior Research Engineer
> Florida Solar Energy Center
> University of Central Florida
> 1679 Clearlake Road
> Cocoa, FL  32922-5703
> Phone:   (321) 638-1454
> Fax:     (321) 638-1439 or 1010
> Visit our web site at: http://www.fsec.ucf.edu
> 
> UCF - From Promise to Prominence: Celebrating 40 Years
>




------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/