[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] time step in hour= 1 ok?



What do you mean by "strange results" in your hourly outputs?

In general, the recommendation is still 4 or even 6 for the number of timesteps per hour.


EnergyPlus Development Team.
At 02:42 AM 3/20/2009, astroiid wrote:
I am running a single zone simulation of an office with airflow network (natural ventilation) and purchased air heating and cooling.
Using time step in hour = 4 produced strange results for my hourly output variables. When I change the time step in hour to 1 the results look ok. Am I making a mistake using time step = 1, although the recommendation in the inputoutput reference is 4? I would prefer the hourly output instead of switching the output variables to "timestep"...


__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___