[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] PVT
Please show the error reported in the err file.
Ανδρέας Χριστοφόρου wrote:
>
> Hi everyone,
>
> I try to simulate a house using Photovoltaic Thermal Solar Collectors
> but I have fatal errors.
>
> In my effort to find the reason I used from example file the /solar
> collector flat plate/ /water example/. In this file I deleted the
> input in Solar /Collector Performance Flat Plate/ and in /Solar
> Collector:Flat Plate:/ /Water/. Then I added for 6 collectors
>
>
>
> *Solar Collector: Flat Plate: Photovoltaic Thermal*
>
> Name: /Collector 1-6/
>
> Surface Name Collector: /Surface 1-6/
>
> Photovoltaic-Thermal Model Performance Name: /20percent�(The same as
> the PVT/ example in example files)
>
> Photovoltaic Name: /Collector 1-6 PV/
>
> Thermal Working Fluid: /Water/
>
> Water Inlet Node Name: /Water 1-6 Inlet Node/
>
> Water Outlet Node Name: /Water 1-6 Outlet Node/
>
> Air Inlet Node:
>
> Air Outlet Node:
>
> Design Flowrate: /autosize/
>
>
>
> *Solar Collector Performance: Photovoltaic Thermal: Simple*
>
>
>
> Name: /20Percent�./
>
> Fraction�.: /0,5/
>
> Thermal Conversion: /Fixed/
>
> Value For Thermal �: /0,2/
>
> Thermal ConversionEfficiency:
>
> Front Surface emmitance: /0,84/
>
>
>
> And for the Photovoltaic
>
> *Generator:Photovoltaic*
>
> Name: /Collector 1-6 PV/
>
> Surface Name: /Collector Surface 1-6/
>
> Photovoltaic Performance Object Type: /Photovoltaic Performance: Simple/
>
> Module Performance Name: /10percen�..�(/The same as the PVT example in
> example files)
>
> Heat Transfer Integration Mode: /Photovoltaic thermal solar collector/
>
> Number of modules in parallel: /1/
>
> Number of modules in Series: /1/
>
>
>
> *Photovoltaic Performance: Simple*
>
> Name: /10percent../
>
> Fraction of surface�.: /0,5/
>
> Conversion efficiency input mode�.: /Fixed/
>
> Value for Cell efficiency if fixed: /0,1/
>
> Efficiency Schedule Name:
>
>
>
> As you can see I only changed the Solar Collectors parameters with
> other solar collectors with Photovoltaic thermal and I added for that
> reason PV generators but I have fatal errors. I added the PVT
> following the example for the PVT (Shop with simple PVT). Can you
> please explain me why this happen?
>
> Thank you
>
>
> ------------------------------------------------------------------------
> Χρησιμοποιείτε Yahoo!
> Βαρεθήκατε τα ενοχλητικά μηνύ ματα (spam); Το Yahoo! Mail διαθέτει την
> καλύτερη δυνατή προστασία κατά των ενοχλητικών μηνυμάτων
> http://login.yahoo.com/config/mail?.intl=gr
> <http://login.yahoo.com/config/mail?.intl=gr>
>
--
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL 32922-5703
Phone: (321) 638-1454
Fax: (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu
UCF - From Promise to Prominence: Celebrating 40 Years
------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/