Re: [EnergyPlus_Support] looking for a feature that existed in v2.2

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

If you specify the outside boundary condition as
"zone", you will get what you want. 

  A6,  \field Outside Boundary Condition Object
       \type object-list
       \object-list OutFaceEnvNames
       \note Non-blank only if the field
Outside Boundary Condition is Surface, Zone, OtherSideCoefficients,
       \note or
OtherSideConditionsModel
       \note If Surface, specify name of
corresponding surface in adjacent zone or
       \note specify current surface name
for internal partition separating like zones
       \note If Zone, specify the name of
the corresponding zone and
       \note the program will generate the
corresponding interzone surface
       \note If OtherSideCoefficients,
specify name of SurfaceProperty:OtherSideCoefficients
       \note If OtherSideConditionsModel,
specify name of SurfaceProperty:OtherSideConditionsModel

EnergyPlus Development Team

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___