[EnergyPlus_Support] Simulation using HAMT model for two zones

[Abdul Murad Zainal Abidin <zabdulmurad@xxxxxxxxx>]

Hello,

 

I currently am doing simulation of an isolation room that shares an internal wall with a ward. Both of the zones do not have any HVAC installed. I plan to make the HVAC for the isolation room functioning for 24 hours. using the HAMT model enables me to evaluate the surface conditions for the external and the internal walls. But when I look at the eso file for the shared internal wall, I find that the EnergyPlus do not compute the same values for the surface temperature and relative humidity.

 

My question is whether EnergyPlus considers the internal wall as two separate walls. Did I make a mistake in naming the outside boundary condition object?

 

I have attached the idf file and the eso file so that anyone can have a look at it and hopefully advise on what to do next.

 

Thank you.

 

Regards,

 

Murad

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Attachment not found:
d:\eudora\attach\HAMT_isolation_MYS.idf

Attachment not found:
d:\eudora\attach\HAMT_isolation_MYS.xeso