In my err file,tips are as follows.HEADERED PUMPS:SIMPLE:CONSTANT SPEED were used both in condenser and cooling side.I can only get sizing datas of zone component and plant.In the idf file,Do the weather file simulation option was set to yes.But in the simulation the weather simulation was not done.Is it because there is a fatal error in the error file.
Another thing made me puzzled is that the results show some warning and no severe error.
** Fatal ** SimCondEquip: Invalid Equipment type requested=HEADERED PUMPS:SIMPLE:CONSTANT SPEED
...Summary of Errors that led to program termination:
------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/