[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Solar Collectors





Thanks for your response, Brent.

The "fraction of motor inefficiencies to fluid stream" is set to 0 for the collector loop pump, so I don't think that is the source for the extra heat.

Regarding loop capacitance, for the tank rate to be so much higher at the beginning of the day's operation than the collector output, wouldn't there have to be a big slug of very hot water sitting in the tubing? It's not making much sense to me, but I'll play around some more and see what I can figure out.

Edwin

--- On Tue, 5/26/09, Griffith, Brent <brent.griffith@xxxxxxxx> wrote:

From: Griffith, Brent <brent.griffith@xxxxxxxx>
Subject: RE: [EnergyPlus_Support] Solar Collectors
To: "EnergyPlus_Support@xxxxxxxxxxxxxxx" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Date: Tuesday, May 26, 2009, 4:36 PM

I suspect that there are at least two things you may not understand.  First is pump heat.  The work of pumping adds additional heat to the loop.  Second is loop capacitance.  EnergyPlus includes a time delay effect between the supply side outlet and the demand side inlet.

 


From: EnergyPlus_Support@ yahoogroups. com [mailto: EnergyPlus_Support@ yahoogroups. com ] On Behalf Of ebcox
Sent: Tuesday, May 26, 2009 2:04 PM
To: EnergyPlus_Support@ yahoogroups. com
Subject: [EnergyPlus_ Support] Solar Collectors

 




I have a question about the SolarCollectorFlate PlateWater example.

I ran it unaltered with the Chicago O'Hare TMY2 .epw weather file. I read the .CSV output into Excel and I'm comparing column L (STORAGE TANK:Water Heater Source Rate) against column AA (Collector1: Solar Collector Heat Transfer Rate) multiplied by 6 (there are 6 collectors). The value for timestep July 01, 8:30 AM is 6620 for the former, 3770 for the latter. Going forward through the time steps, the values become fairly close but not nearly identical.

I would expect from conservation of energy that the heat energy going into the tank would equal the heat energy leaving the collectors. What do I not understand about Energy Plus?

Thanks!

Edwin Cox




__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___