The simulation runs every timestep that you've
specified. I think something about the solar information is updated
on the 20th of every month and the status window is just reporting that to
you.
The Building Performance
Team
James V. Dirkes II,
P.E., LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616
450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Arslan Djumaev
Sent: Wednesday, June 10, 2009 9:58 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Simulation Time StepsHello,
After fixing countless severe errors i finally have my first simulation running and it is calculating through the days. But on the DOS command prompt I see it only mentions every 20th day:
Continuing Simulation for 08/09...
Continuing Simulation for 09/01...
I have specified to do calculations for a whole year with a time step of 6 per hour, does is still do calculations every ten minutes and just does not show it?
Thanks in Advance,
Arslan
Coop student
greenAdvance Inc.
__._,_.___
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___