Re: [EnergyPlus_Support] Simulation Time Steps

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

This is the time between calculating the sun position. 
For further information, you can read about the
"ShadowCalculation" object.

Otherwise, your simulation is progressing normally.  No, it does not
show every calculation in the command window -- but your outputs should
be fine.


At 07:57 AM 6/10/2009, Arslan Djumaev wrote:
> After fixing countless severe
> errors i finally have my first simulation running and it is calculating
> through the days. But on the DOS command prompt I see it only mentions
> every 20th day:
> Continuing Simulation for 08/09...
> Continuing Simulation for 09/01...
> I have specified to do calculations for a whole year with a time step of
> 6 per hour, does is still do calculations every ten minutes and just does
> not show it?

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___