[EnergyPlus_Support] sizing:zone

[Arslan Djumaev <ADjumaev-cc@xxxxxxxxxxxxxxxx>]

Hello,

Is it possible to run the sizing:zone object without any
equipment? Or use the IdealLoads object instead of the actualy furnace
and dx cooling objects? The simulation with all the coils and fans
hooked up is showing odd results so I am trying to troubleshoot and I
want to start with the Sizing:Zone object as I think there is a problem
there.

Arslan

-- 
Arslan Djumaev,
Architectural R&D Engineer
greenAdvance Inc.
605 Northgate Ave.
Waterloo, ON N2L4R1
Cell: (519) 721 5392
www.greenadvance.ca

Confidentiality Warning: This e-mail contains information intended only for the use of the individual or entity named above. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering it to the intended recipient, any dissemination, publication or copying of this e-mail is strictly prohibited.

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___