[EnergyPlus_Support] Re: Fan Coil Unit

["Alan Jackson" <alanjackson7@xxxxxxxxx>]

The easiest way to do this is to use the HVACTemplate:Zone:FanCoil object in conjunction with the other HVACTemplate objects required. Set the outside air per zone to 0 and you can either remove the heating coil or maybe better to set the thermostat to a setting that will not require heat to be turned on. The only advantage to this is that if you decide you want it later and have already gone to the expanded mode the branches etc are already in place.

Also check the example files

-
aj

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "davylagre" <davylagre@...> wrote:
>
> Hi,
> 
> 
> I want to model a fan coil unit without any outside air. I just want a fan coil unit which takes air in my room to cool it.
> Is this operation possible? 
> Moreover, I only need a chilled water coil, not any hot water coil...
> Which object I need to take?
> Tks
>




------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/