[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Output analysis : Zone Air Balance Surface Convection Rate

Dear users,

I try to understand what is include in the output variable : Zone Air Balance Surface Convection Rate.

I made the sum of the "Surface Int Convection Heat Rate" for every surfaces (1 ext wall, 3 interzone surfaces, 1 roof, 1 floor) and "Window Convection Heat Gain from Glazing to Zone". And the result is not the same value than "Zone Air Balance Surface Convection Rate".

I check output variable "Window Gap Convective Heat Flow" and "Window Convection Heat Gain from Gap between Shade and Glazing to Zone " but they are equal to 0.

Can you help me ?

thanks,

Camille T.




------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/