In V3.1 release, Output:Reports has been changed to several
different objects, e.g.
Output:Surfaces: List
Output:Surfaces: Drawing
And only for V3.1 will the Output:Reports object be internally
transitioned. You should look up the correct transitions and do
that. Or, if you are using DesignBuilder, I believe in their next
release they will have the correct new objects listed.
(I answered on the other list too!)
At 02:16 PM 6/27/2009, Paulo Roberto wrote:
Hello, everybody!!!
anyone could tell me what means this warning, that it came from a error
file simulation:
Warning ** IP: Objects="Output:Reports" are being transitioned
to this object="various - depends on fields" **
Thanks,
Paulo Roberto.
------------ --------- --------- ------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov/
The group web site is:
http://groups. yahoo.com/ group/EnergyPlus _Support/
Attachments are not allowed -- please post any files to the appropriate
folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu. pdf
under the Documentation link and press the "search"
button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups. yahoo.com/ group/EnergyPlus _Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups. yahoo.com/ group/EnergyPlus _Support/ join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_ Support-digest@ yahoogroups. com
mailto:EnergyPlus_ Support-fullfeat ured@yahoogroups .com
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support- unsubscribe@ yahoogroups. com
<*> Your use of Yahoo! Groups is subject to:
http://docs. yahoo.com/ info/terms/