[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Error message: in.idf missing
Thank you for the information! I will take a look.
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Bing Dong <bingcat2007@...> wrote:
>
> You can try GenOpt from LBNL for GA-based design optimization.
>
> Another useful resource is the PhD work from Xing (*"Building Load
> Optimization"*, MIT, 2004).
> There are some information on how to run E+ from MATLAB and use optimization
> toolbox from MATLAB.
>
> Bing
>
> On Thu, Jul 23, 2009 at 7:18 PM, Steven (Xing) Shi <SX99A@...> wrote:
>
> >
> >
> > First of all, thank you for your kind answer!
> >
> > Let me explain why I am running it by hand or using batch file instead of
> > using more straightforward EP-Launch.
> >
> > I am working in an architecture program in a Chinese university. In
> > architectural design, the latest development is to incorporate simulation
> > tools such as EP to assist architects making decisions. However, the
> > traditional way of using simulation programs is not the most effective one
> > in our opinion because you need to do the "conceptual
> > design-simulation-adjusting the design-simulation again" iteration many
> > times before you can adequately explore the design space and find the best
> > solution. This is often impossible in a real architectual design project due
> > to the tight project schedule and sometimes, the unwillingness of the
> > architect to repeat the same procedure many times. We believe it is a great
> > obstacle to making the simulation part of the standard workflow for
> > architectual firms.
> >
> > Our latest research work involves using engineering optimization softwares
> > to establish a workflow linking the input parameters (representing the
> > design) to a certain optimization algorithm (such as GA - Genetic Algorith)
> > and then to the simulation program on the back stage. This way, the
> > optimization can be done automatically. It can try hundreds of possible
> > designs in a relatively short period. To do this, we can't just use the
> > EP-Launch. Rather, we have to write our own batch file. Therefore, I need to
> > take the hard road to understand how EP really works on the basic level.
> >
> > I am no expert on EP but want to become one if I can. :) So far, I have had
> > some difficulties using EP. This group really helps.
> >
> > Hope this explains my situation. Thanks!
> >
> >
> > --- In EnergyPlus_Support@xxxxxxxxxxxxxxx<EnergyPlus_Support%40yahoogroups.com>,
> > Linda Lawrie <linda@> wrote:
> > >
> > > If you're doing things by hand, you'll need to follow (or write your
> > > own) batch file to mirror what our batch files do.
> > >
> > > You're gettting this message, most likely, because you have
> > > HVACTemplate objects in your in.idf but haven't run the ExpandObjects
> > > program which changes them from HVACTemplate to the other "native"
> > objects.
> > >
> > > If memory serves, we run:
> > > epmacro
> > > expandobjects
> > > energyplus
> > >
> > > and each of these may use in.<something> as input, output a file
> > > which gets copied to an in.idf for down the line.
> > >
> > > Why are you running by hand, if I may ask?
> > >
> > > At 09:18 AM 7/23/2009, Steven (Xing) Shi wrote:
> > > >Thank you! This helped. However, another arises. I got the
> > > >following fatal message:
> > > >
> > > >The ExpandObjects program has not been run or is not in your
> > > >EnergyPlus.exe folder.
> > > >
> > > >I checked the folder (both in Windows and DOS) and saw the
> > > >ExpandObjects.exe file in the energyplus.exe folder.
> > > >
> > > >What is wrong here? Thanks!
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >--- In EnergyPlus_Support@xxxxxxxxxxxxxxx<EnergyPlus_Support%40yahoogroups.com>,
> > Linda Lawrie <linda@> wrote:
> > > > >
> > > > > Are you going to the command window to run energyplus or trying to
> > > > > double click on it?
> > > > >
> > > > > If you open a command (aka DOS) window and do a dir to make sure
> > > > > in.idf is there (and isn't called something like in.idf.txt) then you
> > > > > should be able to just type EnergyPlus to run.
> > > > >
> > > > > If you're trying to use the RunEPlus batch file, the instructions
> > > > > would be different.
> > > > >
> > > > > At 08:55 AM 7/23/2009, Steven (Xing) Shi wrote:
> > > > > >Yes. I was in the EP root folder. My directory is as follows:
> > > > > >
> > > > > >E:\Research\Software\EnergyPlusV3-1-0
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >------------------------------------
> > > >
> > > >The primary EnergyPlus web site is found at:
> > > >http://www.energyplus.gov
> > > >
> > > >The group web site is:
> > > >http://groups.yahoo.com/group/EnergyPlus_Support/
> > > >
> > > >Attachments are not allowed -- please post any files to the
> > > >appropriate folder in the Files area of the Support Web Site.
> > > >
> > > >EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf
> > > >under the Documentation link and press the "search" button.
> > > >Yahoo! Groups Links
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>
------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/