[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Processing IDF file error





Dear EP support,
 
I am linking an optimization software to EnergyPlus.  Basically, I am using "runeplus 1 1" in DOS mode to run EP.  I got the following message:
 
 EnergyPlus Starting
 EnergyPlus 3.1.0.027, 2009-8-12 19:57
 Processing Data Dictionary
 Processing Input File
 **FATAL:IP: Errors occurred on processing IDF file. Preceding condition(s) cause termination.
 EnergyPlus Run Time=00hr 00min  3.04sec
 ReadVarsESO program starting.
 Requested ESO file=eplusout.eso
 does not exist.  ReadVarsESO program terminated.
 ReadVarsESO program terminated.
 ReadVarsESO program starting.
 Requested ESO file=eplusout.mtr
 does not exist.  ReadVarsESO program terminated.
 ReadVarsESO program terminated.
Removing extra files . . .
===== runeplus 1 ===== Complete =====
 
I couldn't figure out what went wrong.  I used EP-Launch to run the same 1.idf file and got correct results.
 
Please help!  Thanks a lot!
 
XS


__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___