[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Simple HVAC model with Fan:OnOFF



FurnaceWithDXSystem.idf  is a 3-zone model... but you could reduce it to 
one zone.

> Look at example file FurnaceWithDXSystem.idf and see if this meets 
> your needs.
>
> With a direct expansion cooling coil, supply air conditions will vary 
> slightly based on the entering air conditions.
>
> daveurja wrote:
>> I generathe idf file using EnergyPlus Example File Generator. 
>> Apparantly it is setup such that supply fan is modeled as a constant 
>> volume fan. In residential buildings the fan turns on/off as per 
>> demand. So I changed the fan type from Fan:ConstantVolume to 
>> Fan:OnOff. But I got fatal effor due to a Severe  error ** Invalid 
>> Air Loop Component Type = "FAN:ONOFF". What might be the reason?
>> Is there an example idf file with simple HVAC system(one fan, one 
>> cooling coil, one heating coil and one zone) where fan turns on/off 
>> as per demand and supply air temperature is fixed for heating and 
>> cooling mode?
>>
>> Thank you for your help.
>>
>> Dave


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/