Hello
I´m evaluating a system with a self-conteined dx cooling coil and a constant flow fan without any terminal control, very simple. The total flow is 1,9 m3/s, with is set on the fan, on the coil, on the air loop and on the branch. There are 8 zones, the sum of all Airterminal: singleduct: uncontrolled is 1,9 either. However, after the simulation, the output is showing an airflow of 2,26 m3/s, and the airflow in each zone exceeds the specified in the program. Does anyone know why this could be happening?
Novo Internet Explorer 8: traduza com apenas um clique. Baixe agora, é grátis!
__._,_.___
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___