Re: [EnergyPlus_Support] trombe wall simulation q uestions

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

Did you look at the Active Trombe Wall example file?

On Thu, 29 Oct 2009 01:09:50 -0000, "xyliu925" <bill.liu@xxxxxxxxxxxxxx>
wrote:
> Hi everyone
> 
> How can I model a trombe zone with relief air path?
> 
> I am doing practice on trombe wall model. After I did on passive trombel
> wall, I found that the room temperature in zone 1, which is next to
trombe
> zone is too high. My thinking is if we relief the air on top of the
trombe
> zone, then the zone 1 temperature should drop down.
> 
> How could I simulate this?
> 
>     http://docs.yahoo.com/info/terms/


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/