[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Error - Mass Flow Rate Calculation



Hello to everyone.

Does anyone know why this error is happaning:
  
** Warning ** PlantSupplySide: Error (CheckLoopExitNode) -- Mass Flow Rate Calculation in PlantLoop=RW_AQ, Outlet and Inlet differ by more than tolerance.
   **   ~~~   **  Occurrence info=PORTO - PRT IWEC Data WMO#=085450, 01/01 02:10 - 02:20
   **   ~~~   ** Loop inlet node=ND_EN_BB_AQ, flowrate=0.9500 kg/s
   **   ~~~   ** Loop outlet node=ND_SD_P_SUP_AQ_SD, flowrate=0.0000 kg/s
Thank you

MN



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/