[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Why my cooling coil is heating the air?





Suggest you send your question and input file to the helpdesk:
energyplus-support@xxxxxxxx

At 11:19 AM 1/15/2010, Paulo Jose Schiavon Ara wrote:
I'm simulating an office building in a hot climate and when I run the simulation I have some severe errors related with cooling coil control.
 
In Controller:WaterCoil object I set the Action as being "reverse" because I have cooling coil.
 
The error shows that the actuator temperature (entering chilled water temperature) is above setpoint temperature of the outlet air. So what is happening is that the water entering the cooling coil is not cool enough in order to make air tempetature fall below setpoint temperature.
 
I other words, the cooling coil is heating!
 
Could someone please help me finding what is causing this problem and what could I do in order to fix this problem?
 
Thanks!
Paulo Ara


__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___