Re: [EnergyPlus_Support] Output in a Spreadsheet

[Sumwel Plus <sumwelplus@xxxxxxxxx>]

Thank you! I have spent so much time to go through the tutorials. I have also run some of the sample files and the spredsheet button was enabled.

I picked an example file to edit with my input but just after the spreadsheet button ceased to be enabled. I have an object under output variable. But the pull down menu under variable name is not active.

 

What could be wrong then? please, please am getting behind my work schedule

 

 

---

From: Linda Lawrie <linda@xxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Tue, January 19, 2010 3:20:33 PM
Subject: Re: [EnergyPlus_Support] Output in a Spreadsheet

 

Look at the .err file.  See what errors were in your simulation.

Have you included "output:variables" in your input file?  If you have none, you will have no spreadsheet output.

Have you run some of the tutorials prior to this?  And did they work okay?

Run one of the example files -- they all have outputs to the spreadsheets.

At 02:05 AM 1/19/2010, Sumwel Plus wrote:

I am generating a spreadsheet in E+ Luanch, but the spreadsheet button under is not enabled. Have tried it by going to View/Options, select and autofind but is still not enabled.

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___