Hi, Rasha,
Your IDF is running correctly. Is there any other report you wanted to generate? Most of them are in the html file.
All those files mentioned in the error file can be deleted. They are not the indivitual ones.
Add:
OutputControl:Table:Style,
HTML, !- Column Separator
JtoKWH; !- Unit Conversion
This is required to get the HTML format and to change the unit to kWh.
Comma style is the .csv format.
Change:
Output:Table:SummaryReports,
AllSummaryAndMonthly; !- Report 1 Name
! Output:Table:SummaryReports,
! AllSummary; !- Report 1 Name
You can only use one form. Using both will crash the program.
The .csv file shows the requested variable monthly values.
I did not remove any of the un-used object when simulating the IDF with the attached results.
I have not changed or removed the objects mentioned in the error file. You can try removing them again and sent it to me. I can then show you which one should not be removed.
=====================
Output:Variable,*,Daylight Illum at Ref Point 1,hourly; !- Zone Average [lux]
Output:Variable,*,Glare Index at Ref Point 1,hourly; !- Zone Average []
Output:Variable,*,Time Exceeding Glare Index Setpoint at Ref Point 1,hourly; !- Zone Sum [Hour]
Output:Variable,*,Ltg Power Multiplier from Daylighting,hourly; !- Zone Average []
Output:Variable,*,Daylight Illum at Ref Point 1 from Window,hourly; !- Zone Average [lux]
Output:Variable,*,Daylight Luminance of Window As Viewed From Ref Point 1,hourly; !- Zone Average [cd/m2]
These are in the .rdd file, in IDF format. The monthly sum values, I think, are already in the table report. You can add the monthly sum on the spread sheet, or change the hourly to monthly..
! Output:VariableDictionary, regular;
Output:VariableDictionary, IDF;
Change the regular to IDF to get the .rdd in IDF format.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: roushaa_84@xxxxxxxxx
Date: Tue, 26 Jan 2010 05:25:58 -0800
Subject: RE: [EnergyPlus_Support] lighting electricity
|
Thank you very much. Please elaborate as I'm a new user and your advice helps me alot. I tried erasing the incorrect names mentioned in the .err file, but I erased too much that I didn't have the output I need from daylighting. I want to have as an output the monthly daylighting , the glare index and the sum of hours having glare, but without all that warnings.
Thank you very much |
Say Happy New Year with Messenger for Mobile. See more.
__._,_.___
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___