RE: [EnergyPlus_Support] input for HAMT modeling outputs

[ozgur gocer <ozgurpehlivaner@xxxxxxxxxxxx>]

thanks for all suggestions and comments.

i have checked input and output reference firstly. but the engineering reference includes more information.

with my best wishes

ozgur gocer
--- 01/02/10 Pzt tarihinde Linda Lawrie <linda@xxxxxxxxxxxxxx> Å?öyle yazıyor:

Kimden: Linda Lawrie <linda@xxxxxxxxxxxxxx>
Konu: RE: [EnergyPlus_Support] input for HAMT modeling outputs
Kime: EnergyPlus_Support@xxxxxxxxxxxxxxx
Tarihi: 1 Å?ubat 2010 Pazartesi, 20:21

 

Suggest that you read the description of the HAMT model in the Engineering Reference.  starting on page 30, pdf page 67.


At 11:13 AM 2/1/2010, ozgur gocer wrote:

thanks for your reply. In modeling wufi a grid is needed. but in Energyplus the input is only the thickness of layer. Then how can we specify the number of cell? If i specify for the output of RH, temperature or water content from 1 to let say 10 cells,  does the program divide the construction (e.g a wall) into 10 cells?
best wishes
ozgur gocer

---

Yahoo! Türkiye açıldı!
Haber, Ekonomi, Videolar, Oyunlar hepsi Yahoo! Türkiye'de!
www.yahoo.com.tr

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___