[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Need help with this idf

Can anybody please take a look and tell me if there are any changes i can make in order for the simulation to proceed? I really need your help.
Thank you,

From: Natassa Matsota <natamats@xxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Wed, February 3, 2010 3:11:31 AM
Subject: Re: [EnergyPlus_Support] Need help with this idf


Thank you all for your help.The simulation finally proceeded. Now I have a new question. I want to change the characteristics of the heatpump and the ground heat exchanger, but when I did that the simulation stopped and it had mistakes again. I am attaching the idf and the mistakes.Please take a look. The fields that have been changed are the max loop volumetric flow rate in PLANT LOOP, CONDENSER LOOP, CONTROLLER:SIMPLE and in PUMP and all the numbers in GROUND HEAT EXCHANGER, HEAT PUMP:COOLING and HEATPUMP:HEATING.
Thank you,

From: Natassa Matsota <natamats@yahoo. com>
To: EnergyPlus_Support@ yahoogroups. com
Sent: Sun, January 31, 2010 12:18:30 AM
Subject: [EnergyPlus_ Support] Need help with this idf


I am facing problems with this idf. I am pretty sure that the nodes are correct but it has mistakes which i do not know how to correct. I am attaching the idf and the mistakes. I really need your help. Please take a look and let me know what you think.
Thank you,


The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe