Hi, Natassa Since you have changed so many numbers, and with such a slow running program, I am afraid that I cannot help you this time. The section of code you are changing is relatively small. However, the simulation time on my 150MHz PC was very long, more than 2 hours per simulation, because you are still using version 2.2. You should make small changes and then can keep track of the errors, or capacity changes of your plant. Dr. Li To: EnergyPlus_Support@xxxxxxxxxxxxxxx From: natamats@xxxxxxxxx Date: Tue, 9 Feb 2010 08:07:08 -0800 Subject: Re: [EnergyPlus_Support] Need help with this idf Hello, Can anybody please take a look and tell me if there are any changes i can make in order for the simulation to proceed? I really need your help. Thank you, Natassa From: Natassa Matsota <natamats@yahoo. To: EnergyPlus_Support@ Sent: Wed, February 3, 2010 3:11:31 AM Subject: Re: [EnergyPlus_
Hello,
Thank you all for your help.The simulation finally proceeded. Now I have a new question. I want to change the characteristics of the heatpump and the ground heat exchanger, but when I did that the simulation stopped and it had mistakes again. I am attaching the idf and the mistakes.Please take a look. The fields that have been changed are the max loop volumetric flow rate in PLANT LOOP, CONDENSER LOOP, CONTROLLER:SIMPLE and in PUMP and all the numbers in GROUND HEAT EXCHANGER, HEAT PUMP:COOLING and HEATPUMP:HEATING. Thank you, Natassa From: Natassa Matsota <natamats@yahoo. com> To: EnergyPlus_Support@ yahoogroups. com Sent: Sun, January 31, 2010 12:18:30 AM Subject: [EnergyPlus_ Support] Need help with this idf Hello, I am facing problems with this idf. I am pretty sure that the nodes are correct but it has mistakes which i do not know how to correct. I am attaching the idf and the mistakes. I really need your help. Please take a look and let me know what you think. Thank you, Natassa Live connected with Hotmail on your phone. Learn more. __._,_.___ The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/ Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files. EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe __,_._,___ |