Hi, Natassa
The followings are in your .rdd file after simulation.
HVAC,Average,Ground Heat Exchanger Average Borehole Temperature[C]
HVAC,Average,Ground Heat Exchanger Heat Transfer[W]
HVAC,Average,Ground Heat Exchanger Inlet Temp[C]
HVAC,Average,Ground Heat Exchanger Outlet Temp[C]
HVAC,Average,Ground Heat Exchanger Mass Flow Rate[kg/s]
HVAC,Average,Ground Heat Exchanger Average Fluid Temp[C]
HVAC,Average,GSHP Electric Power [W]
HVAC,Average,GSHP Load Side Heat Transfer Rate [W]
HVAC,Average,GSHP Source Side Heat Transfer Rate [W]
HVAC,Average,GSHP Load Side Outlet Temperature [°C]
HVAC,Average,GSHP Load Side Inlet Temperature [°C]
HVAC,Average,GSHP Source Side Outlet Temperature [°C]
HVAC,Average,GSHP Source Side Inlet Temperature [°C]
HVAC,Average,GSHP Load Side Water Mass Flow Rate[kg/s]
HVAC,Average,GSHP Source Side Water Mass Flow Rate[kg/s]
Have you looked at these?
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: natamats@xxxxxxxxx
Date: Sat, 13 Feb 2010 11:44:02 -0800
Subject: Re: [EnergyPlus_Support] Need help with this idf
Hello,
Can somebody please tell me how can i find the consumption of electric energy and the heat transfer from the ground?
Thank you,
Natassa
Can somebody please tell me how can i find the consumption of electric energy and the heat transfer from the ground?
Thank you,
Natassa
From: Natassa Matsota <natamats@yahoo.
To: EnergyPlus_Support@
Sent: Thu, February 11, 2010 1:02:05 PM
Subject: Re: [EnergyPlus_
Hello Linda,
which field i have to change in order to correct this mistake because i can t figure it out?
Thank you,
Natassa
which field i have to change in order to correct this mistake because i can t figure it out?
Thank you,
Natassa
From: Linda Lawrie <linda@fortlawrie. com>
To: EnergyPlus_Support@ yahoogroups. com
Sent: Tue, February 9, 2010 6:16:44 PM
Subject: Re: [EnergyPlus_ Support] Need help with this idf
Your error:
** Warning ** Check GLHE design inputs & g-functions for consistency
** Fatal ** FOR GROUND HEAT EXCHANGER:VERTICAL VERTICAL GROUND HEAT EXCHANGERGLHE delta Temp > 100C.
Did you do that?
If you can't figure it out, please contact the helpdesk with your input file.
Send email to EnergyPlus-Support@ gard.com or log into
http://energyplus. helpserve. com
At 09:07 AM 2/9/2010, Natassa Matsota wrote:
** Warning ** Check GLHE design inputs & g-functions for consistency
** Fatal ** FOR GROUND HEAT EXCHANGER:VERTICAL VERTICAL GROUND HEAT EXCHANGERGLHE delta Temp > 100C.
Did you do that?
If you can't figure it out, please contact the helpdesk with your input file.
Send email to EnergyPlus-Support@ gard.com or log into
http://energyplus. helpserve. com
At 09:07 AM 2/9/2010, Natassa Matsota wrote:
Can anybody please take a look and tell me if there are any changes i can make in order for the simulation to proceed? I really need your help.
Thank you,
Natassa
Live connected with Hotmail on your phone. Learn more.
__._,_.___
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___