Re: Fw: [EnergyPlus_Support] USE OF INTAKE AND EXHAUST FANS

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

I would try first using the ZoneVentilation as you have
indicated.  You can put in a fan efficiency and pressure rise
there.  If that is not enough, then try other methods.

At 01:47 AM 2/16/2010, Sumwel Plus wrote:




> ----- Forwarded Message ----
> From: Sumwel Plus <sumwelplus@xxxxxxxxx>
> To: energyplus_support@xxxxxxxxxxxxxxx
> Sent: Sun, February 14, 2010 1:27:31 PM
> Subject: [EnergyPlus_Support] USE OF INTAKE AND EXHAUST FANS
>
>   
>
> Hi All,
>  
> Help Please! I am modelling a test cell that has an intake fan on the
> south wall and an exhaust fan on the north wall, with the windows closed
> 24/7. Do I have to model the fans OR it is enough to select the either
> intake or exhaust in the Ventilation Type field  under the
> ZoneVentilation class in the Zone Airfllow Group in the IDF. If I need to
> model please help me with the group(s) in IDF to use, please.
>  
> Thank you in advance,
> Sumwel

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___