[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Energy Plus - adding multiple fancoils to zone in the idf

I've just started going through the excersize of adding additional fancoils to a zone.

Each FC has to be defined.

Each additional FC has to lie on it's own branch split from the plantloop demand side splitter (as only one splitter per loop is allowed).

The same for the demand side mixer.

And the Demand side branch list has to be updated with the extra branches.

AND THAT'S JUST FOR HOT WATER...the same still goes for CW.
------------------------
Even though all the fancoils may be the same!

Is their no way to use a multiplier of sorts to only have to do this once? Or at least once per Fancoil type?

I just had a project with hundreds of zones, each with up to 20 fancoils consisting of variants of 4 different types.



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/