[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Is this output logical ?





Dear,

I am doing a simulation for a double pane window filled with gas, i did simulation twice first i used the filled gas argon & the other simulation i used air for the same thickness which is 13MM.

while checking the output i found that the heat gain for Argon is greater than heat gain for Air under the same conditions, is this logical or not ? since argon is widely used in energy efficiency.

thanks in advance 
Adam


__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___